Olympus TG-6 lens Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A removable Lens Cap for the Olympus TG-6 camera
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 1
- Wyświetlenia
- 480
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a removable lens cap for the Olympus TG-6 Camera. It is printed to replace the default bezel that you receive with the camera. 2 files need to be printed for the full assembly. The two halves are then connected together using a piece of 1.75mm filament.
The lens cover is designed with a little tab that will lock closed and keep it from falling open.
The cover opens down and to the right so that once the joint becomes a bit more loose it will naturally close if you drop your hand down and go to put the camera in your pocket.
I recommend using supports for printing the base and the cover can be printed on its back with no supports