Rooster Vane v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rooster vane showing the wind direction
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 248
- Makes
- 1
- Views
- 884
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
This is a Rooster Vane from few parts. You could use some Loctite glue, especially for gluing the rooster and the rooster holder. One of the variant I made is with holes - you could use some filament with glue. The base I made in two variants as well - one is for screws and the other is for a cone ending tower. print either one you need.
The Bottom Cone you can glue, or simply push it to bottom part of the rooster holder. Its a cone for minimum resistance by rotating.
I used PC/ABS (GD Filament), Printer: BambuLab X1 Carbon with 0.4 nozzle; 0.2mm layer height. Some of the parts need support - the compass, the holder cone.
I added a hexogram holder as well as a scond variant of the rooster - it has two 3 mm holes, sp you could use a filament to keep it together with the round holder (some glue helps as well) :)