1/4" Hex Shank Impact Socket Adapter Holder - Two Versions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keep those hex head impact socket extensions where you can find them! Includues two versions, 1x3 and 2x3 sockets.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 144
- Makes
- 1
- Views
- 534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Works with most sockets and bits with a ¼" hex shank. You can throw these into your toolbag and the tools will stay in place. Includes two versions.
This should be printed using TPU filament; flex is important here. As typical for a lot of my postings, I printed this using a TPU with a Shore 98A hardness https://amzn.to/3qQmWb0 (affiliate), but a TPU a bit softer should work okay. The Titan Impact socket extensions shown are also from Amazon https://amzn.to/3Nquxoe, but pretty much all ¼" hex shank tools will fit.
The object was designed/optimized for printing on an Original Prusa I3 MK2/MK3 series printer using PrusaSlicer.
IMPORTANT: This was designed to be printed using TPU filament.
Filament Settings: If you are new to using TPU, selecting “Generic Flex” from the Prusa supplied “Filament Settings” in PrusaSlicer should work well.
Print Settings: Selecting “0.20mm NORMAL” in the Prusa supplied “Print Settings” in PrusaSlicer should work well with a "Infill: 10% Gyroid" modification.
Layer Height: 0.2mm
Perimeters: 2
Solid Layers: Top=5, Bottom=4
Infill: 10% Gyroid.