Little Young Highland Cow - MMU

I painted the cow in four colors! See the finished video here:

https://www.youtube.com/shorts/pvG0t1Qk1NE

MMU Slots are:

1 - beige (feet, face, chest)

2 - white (horns)

3 - coral red (nose)

4 - not used

5 - light brown (fur)

Here is the 3mf with the painted object, in a single print and five at once.

I printed these at  .3 layer height, .6 nozzle, 2 perimeters, 15% infill, organic supports with a .4 detach easy distance, which all turned out great and lower the print time per object to a reasonable 1hr and 35 minutes per cow for a total of 9 hours 30 min for all six cows on one plate. Printing a single cow is not advisable as the 150 tool changes account for most of the print time or four hours and 19 minutes.

Note - The printed cow on the MK4 kit box and in the video has his face the same color as the body. The 3mf painted model file to download here is further improved with a face color the same as the feet (beige as opposed to dark brown). Painting the face its own color adds 50 more tool changes and increases the print time by 1 hour and 37 minutes but is worth it I think.

Here is my MMU setup:

most current setup - https://www.youtube.com/shorts/p-DGKHfmRww

and here in more detail - https://www.youtube.com/shorts/Ix5qLEh_60g