EcoGrip 3 - Slackline webbing grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Topology optimized slackline linegrip! Strong and lightweight, low cost!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 87
- Makes
- 1
- Views
- 571
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a follow-up project to a previous 3D printed Line grip project. This has been break tested at over 6kN in PLA (minor modification since that test should increase this) - more tests to come. PETG will be even stronger!
This was created using mechanical analysis software and topology optimization to create an extremely light and robust product, weighing in at <80g, this is about the same weight as the Petram Cito, with a lot more surface area - so less chance of damaging your webbing. (And a fraction the cost)
3mm Vibram XS Grip2 rubber for the plate, well prepared and super-glued to the base.
Spliced 3mm Dyneema for the rope, but it will accept up to 6mm cord.