Headphone holder with Cable guide V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
V2 of my beefed up headphone holder with cable guide
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 196
- Makes
- 2
- Views
- 938
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 03-10-2023 Screw and Clamp Block Updated! Both Should work fine now if your filament is dialed in. Happy printing!
Updated version of my original model → https://www.printables.com/model/509443-headphone-holder-with-cable-guide
The screw and clamp block is compatible with V1 BUT only if you have atleast 5mm of space between your desk and the lower arm of the main Body.
V2 has more clamping force, slightly neater design and more versions to suit everybodys needs.
-------------------------------------------------------------------------------------------
You also hate running over your Cable with your chair? Fixed it!
Neatly organizes your Headphones and your headphone cable on the edge of your Desk.
Also available in a wireless version and two different configurations of the cable guide (See pictures above)
Available in multiple sizes from 30-50mm that should fit most desks, if i missed a size let me know and i will add it. (Adjustment range of each version is 15mm. For example 50mm down to 35mm) The dimension on the model is the max Value
The screw is a tight fit so it wont back out, if it doesnt fit right away scale it down in the slicer. (If you scale the screw you have to scale the clamp block down aswell, ONLY scale both in XY)
After you threaded the screw into the main Body the clamp block is ment to snap into the top of the screw. If you cant get it in with only slight amount of force scale the block down in the slicer. Update 03-10-2023: Clamp block can now be removed if you fully unscrew the screw until the block releases, dont try to apply side pressure to the clamp Block the nipple WILL break off.
To mount the cable just gently feed it in a Z Pattern between the teeth of the guide
All Parts print without support.
Part orientations like in the Pictures
3 Wall Loops
25 - 35 % Infill ( I recommend Gyroid)
0.2mm Layer height
0.4mm Nozzle
Printed in Extrudr PLA NX2 on the Bambulab X1C, ~1h to completion
03-10-2023 Printed in Bambulab Basic Bronze on the Bambulab X1C ~1.2h to completion