1 / 8
Original Prusa Enclosure (OPE) - Main Power Switch — image 1
1 / 8

Original Prusa Enclosure (OPE) - Main Power Switch

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.23 – €0.28 net (excluding VAT)

For file: PowerBox_V2-PlugMountFrame_0.2mm_PETG_MK3S_17m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.26 excluding VAT (range midpoint).

Weight reported by the author
3 g
Print time reported by the author
16.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

With the LED strip, the air filter and a Raspberry Pi on the enclosure, you can easily turn everything on and off.

Rating
0 / 5
Likes
10
Downloads
19
Makes
0
Views
676
Reviews
0

Updated at source:

Model information

Category
Accessories
License
GNU General Public License v2.0

I could have used a power strip with a switch, but this way it has less tangled wires and plugs and looks much better too. 

For this model, you need some electric hardware, I bought it at AliExpress: 

To assemble the parts, you need a few nuts and bolts.

  • Interface side
    • 8pcs. 3mm hexagon nut, inserted while printing, gcode has a pause on layer 36
  • Switch side
    • 6pcs.  3mm square nut, inserted after printing
  • EU power socket
    • 4pcs.  3mmx8mm Allen bolt
  • C14 power socket
    • 4pcs.  3mmx6mm Allen bolt
  • To screw the two sides together
    • 4pcs.  3mmx8mm Allen bolt (I used black ones)
  • To mount the power box on the enclosure
    • 1pcs.  3mmx8mm Allen bolt
    • 1pcs.  3mmx6mm Allen bolt

Wiring schema

 

Tags