USB Camera for Voron 2.4 - Top Inside Mount

I use USB web cams on both of my Voron2.4r2 printers for 2 years now.

I use a 8mp USB Camera Module with 3.6mm Lens and made the cases for it.

This mount has the following advantages over other full sizes cameras for monitoring prinitng.

• Camera is installed inside the Voron 2.4 frame.
• Camera view is not obstructed by the plexiglass panels.
• Camera view covers the whole printed area.
• Does not decreases print limits.
   

This camera is connected to a Raspberry Pi 4 with 4GB memory and CPU is always below 0.5 and a few GB of memory always available.

You will also need the following hardware to complete the case and attach it to the top rail.

• 1 x M2 16mm long Flat Head Bolt
• 3 x M2 20mm long Flat Head Bolt
• 4 x M2 heat inserts
• 1 x M3 T-nut
• 1 x M3 8mm long Socket Bolt