1 / 5
Rita's Mini Fairy Lights | LED pendent | LED-Lichterkette Rita
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini diffusor for 5 mm LED to make your own fairy lights. Diffusor für Mini-Lichterkette zum Selbstbauen.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 503
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This started as a repair job when a diffusor of a mini led fairy lights was missing.
Now you can build your own mini fairy lights with this light blub like diffusor!
Features
- fits standard leaded LEDs, 5 mm or smaller (inner rim holds 5 mm LEDs in place)
- assembly with plug (press fit) or hot glue
- glows nicely like a mini light bulb (0.8 mm wall thickness)
- prints fast
Printing
- General Setting: 0,2 mm layer height, ‘speed’ setting for prusa slicer
- Perimeter:
- 2 perimeter for diffusor
- 2 or 3 for plug
- white or transparent PLA or PETG
- I printed with white eSun PLA an compensated for shrinking with 103.6% scaling.
Assembly
- solder LEDs on wires
- cover LED with the diffusor
- press plug into buttom of diffusor or hot glue LED in place
Electrical / driving the LEDs
It's best to use a LED driver board or plug to drive a string of LEDs (connected in series). The original fairy lights had 50 LEDs in 2 serial strings, so according to the label on the plug roughly 60 mA per string.
Search for ‘Fairy Lights Power Supply’ (deutsch: “LED Lichterketten Netzteil”).