1 / 5
90° Clamp Wall Mount for Philips Hue Lightstrips and PSU — image 1
1 / 5

90° Clamp Wall Mount for Philips Hue Lightstrips and PSU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.17 – €1.43 net (excluding VAT)

For file: HueLightstripPSU_0.4n_0.2mm_PETG_MK4_1h30m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.30 excluding VAT (range midpoint).

Weight reported by the author
13 g
Print time reported by the author
1.5 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Wall mountable clamps for Philips Hue Lightstrips and the PSU. Illuminate your wall and ceiling!

Rating
5 / 5
Likes
172
Downloads
360
Makes
2
Views
2,712
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

ENG

Attention: 

Not a genuine Philips component!

You want the light strip to shine on the ceiling? No problem with this wall bracket. Simply screw it to the wall and clamp the Hue Light Strip in place. With several clamps, arches can also be created without any problems (as shown in the photos).

I recommend printing in PETG for more durable clamp power.

UPDATE: Now including a screwable wall mount for the Strip-PSU. Fits best with the original adhesive tape still attached but still covered.

DEU

Achtung:

Kein Original Philips Bauteil!

Der Lightstrip soll an die Decke strahlen? Kein Problem mit dieser Wandhalterung. Einfach an die Wand schrauben und Hue Lightstrip einklemmen. Mit mehreren Klemmen können auch Problemlos Bögen gestaltet werden (wie in den Fotos gezeigt).

Ich empfehle den Druck in PETG, damit die Klemmkraft dauerhafter ist.

UPDATE: Jetzt auch mit anschraubbarer Wandhalterung für die PSU des Lightstrips. Passt am besten, wenn die original Klebestreifen noch an der PSU befinden, aber noch abgedeckt sind.

Tags