Dremel-to-dewalt adapter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.36 – €7.78 net (excluding VAT)
For file: DCW600 v1_0.2mm_PLA_MK3S_7h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.07 excluding VAT (range midpoint).
- Weight reported by the author
- 80 g
- Print time reported by the author
- 7.48 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An adaptor that fits a Dremel 3000 so it can be used with the classic DeWalt router attachments
- Rating
- 0 / 5
- Likes
- 42
- Downloads
- 127
- Makes
- 0
- Views
- 1,534
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I wanted to route some EVA foam with a tiny bit that only fits in my dremel, but the existing dremel-to-router attachments did not meet my requirements as they have no height adjustment. I already own the dewalt DCW600, so I thought: why not make an adaptor for the dremel that fits in the D262004 ( = the plunge base)?
The adaptor has the same formfactor as the usual dewalt router, so you can use it with all accessories such as dustcollectors. The dremel screws into the adaptor, the locking button can line up with the opening in the adaptor, but the fit will be very thight. Don't tighten any further as it will be hard to release.
It has a hole so you can access the locking button for changing bits and the dremel speed slider is still accessible.
I've added a printing file for prusament PLA. The overhang prints without support.
Fusion 360 files also available if you want to make changes, but it's not a really user friendly file as I've just mixed existing files I could find together.