Counting matching models…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
I needed to make some varying sized circle cuts with my DeWalt 20V DCW600 router and found bobmakes awesome model. I am even more thankful that he included some cad files as my made mods so much easier so THANK YOU! I originally started…
Sawdust catcher for DeWalt DCW600, DCW604 to increase sawdust extraction efficiency, which is easy to snap onto the original base of the DeWalt DCW600 milling machine (theoretically it should work for the D26200, DWP611 as well, but I am…
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
I recommend 4 top and bottom layers, 3 walls, 30% infill.
I really don't like dust flying around my garage, routing edges was always one of the worst offenders. This shroud, combined with the standard dust collection port for DeWalt trim routers, will nearly eliminate stray dust from edge…
Circle jig for DeWalt DCW600 DSW604, which is attached to the original guide of the parallel stop and also uses the original locking screw. It is only necessary to melt the nut M3 to fix the circle axis
This router base will assist you in routing grooves at an equal distance from the edge of a board. I used two screws, washers and handles that I had on hand. The screws are ¼ inch 20.
Adapter that allows the protruding parts to be milled into a plane. The adapter snaps into place on the original base. Assembly and disassembly is a matter of seconds. At the end of the adapter is a spherical handle that helps stabilize…
Circle jig for Dewalt DCE600, DCW604, which is easy to snap onto the contact surface of the original base without any tools and can be milled with even small circles. It is necessary to screw the M5 screw without a head into the sliding…
Simple wall mounts.
This is a multiboard holder for the Dewalt DCW600 compact (palm) router. This is a remix of the drill holder for multiboard by @andrepadua, which is a really nice sturdy drill holder I use for my Dewalt drill and impact driver. I wanted…
This is a circle jig for the DEWALT 20V Max XR Cordless Router DCW600B. The holes are at 2mm increments. You attach it to the bottom of the router in place of the router base, using the same machine screws that come with the router base.…
Still building the Routertable, updates will follow soon(ish)
Used @DIYwithJJ's instructional video to combine @KajasX's dust port attachment for DeWalt DCW600 DCW604 with @PouOu's excellent DeWalt Airlock Adapter (male end). The male airlock end is the same dimensions as on my palm sander DCW210,…
Collets organizer which I use for the DeWalt trimm router DCW600. This organizer fits exactly into the TSTAK carrying case. A piece of foam must be glued to the carrying case lid, so that the collets do not fall out of place in the closed…
11/27/2025 -- I printed the Dewalt base but my handheld router did not fit on top of the jig... the base was too large! So I removed the one that was there and uploaded the new base that will fit the palm router and with the screw…
Jednoduchý adaptér který se přišroubuje místo originálního průhledného plastu na spodku frézky. S frézkou je pak možné pojíždět po vodící liště, která je součástí příslušenství k ponorné pile DeWALT. Materiál: PETG, ASA Vrstva: 0,2mm…
It is the maximum size of plate that my Bambu P1S can print.
DeWalt DCW600 holder in carrying case. I was looking for a suitable case for the Dewalt DCW600 milling machine. The original case for the DCW604 seemed too big to me, so I decided to modify the classic DeWalt case from the cordless drill…
Recently I needed to fit a large number of door hinges so designed an adjustable jig (link at end of text) that needed a depth controlled router fence/baseplate. None of the baseplates I could find suited my needs hence this model design.…
Na přípravek se originálními šrouby připevní tělo frézky DeWalt DCW600. Do materiálu pro opracování předvrtáme otvor průměru 1,5mm ve středu zamýšlené kružnice či oblouku. Jezdcem nastavíme poloměr otáčení frézky. K výtisku je zapotřebí…
Dust collector holder DeWalt DCW600 DCW604 in carrying case DeWalt. Parts are attached to the carrying case with double-sided tape.
Contact disc holder Dewalt DCW600 DCW604. The holder allows you to keep the disc in the case in place. Must be glued with double-sided tape
Alternative base for DeWalt DCW600 and D26200 milling machines. I made this base so that I wouldn't have to screw the original base onto the milling table every time I wanted to use the milling machine on the table. Cutting depth…
Recently I needed to fit a large number of door hinges so designed an adjustable jig (link at end of text) that needed a depth controlled router fence/baseplate. None of the baseplates I could find suited my needs hence this model design.…
These baseplates replace the stock baseplate and integrate a bushing for use with templates. I use these for engraving bits which don't have bearings. It can be hard to see what you are doing with dust extraction so I printed one in…
This is mount for the Dewalt Router DCW600. This can be mounted with screws or pegboard. The second model is for the pegboard clips. -- This prints on its back with supports (for the peg clips), brim is optional. Category: Organization
Key holder in carrying case for DeWalt DCW600 DCW604 and other 17mm. With this holder, the key in the carrying case will always be in place. It is necessary to glue a magnet measuring 4x10x29mm into the printout. I fasten the holder to…
Parallel guid holder DeWalt DCW600 DCW604. Both parts must be connected with a rubber rope in order for the locking to fulfill its function. I fasten it to the carrying case with double-sided tape
Although this may look very similar to the model https://www.printables.com/model/783093-detachable-dewalt-router-circle-jig I have completely created this from scratch on my end using that as inspiration. There are two versions, a two…
This collar friction-fits around the existing collar, widens it to 5" x 5" (the original collar's dimensions, as near as I could tell, were not a round number in either metric or imperial) and adds a port for a 2.15" shopvac hose. If you…
Hello! I'm an Electrician making inserts for my tools. Insert Information : Its made for the Milwaukee Packout Ammo can Box. I used a Dewalt XR Router (Model # DCW600B) as the reference tool. Its modeled for a tight fit so fitment will…
Allows for use of a 1.25" vacuum to work with the DNP615 vacuum port for Dewalt routers
Wanted a model that required less supports and screwed to the router body
What the title says. Spacers are used between the plate and the knobs, as the aluminum spacers which come with the kit are too large to use with the plate. The collet adapter is used on the centering mandrel (part of the festool kit) to…
