IKEA DETOLF glass connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connects the glass sides of an IKEA DETOLF cabinet.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 90
- Makes
- 0
- Views
- 645
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
I had some old IKEA DETOLF display cabinets and when I moved them a few years ago, the plastic pieces that go down the corners to hold the glass sides together just fell apart (I guess because they had been sitting in a window for several years). I couldn't get replacements from IKEA, so I made up a model of them and printed sections that I put at a few strategic places, not along the full height.
I hope nobody else needs these, but in case someone does, I thought I'd share.
The model prints standing on its end (in the z-direction), as in the STL file. It's 10mm high for convenient scaling to whatever length you want. I printed them as in the 3MF file – 10cm high and five at a time. I used PETG so it wouldn't be too brittle, but that might not be necessary. And, speaking of necessary, use a brim.
I don't have the cabinets anymore, so I just printed the 10mm version from the STL in PLA for the photo. You probably want to print longer sections than that.