IKEA DETOLF glass connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects the glass sides of an IKEA DETOLF cabinet.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 645
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I had some old IKEA DETOLF display cabinets and when I moved them a few years ago, the plastic pieces that go down the corners to hold the glass sides together just fell apart (I guess because they had been sitting in a window for several years). I couldn't get replacements from IKEA, so I made up a model of them and printed sections that I put at a few strategic places, not along the full height.
I hope nobody else needs these, but in case someone does, I thought I'd share.
The model prints standing on its end (in the z-direction), as in the STL file. It's 10mm high for convenient scaling to whatever length you want. I printed them as in the 3MF file – 10cm high and five at a time. I used PETG so it wouldn't be too brittle, but that might not be necessary. And, speaking of necessary, use a brim.
I don't have the cabinets anymore, so I just printed the 10mm version from the STL in PLA for the photo. You probably want to print longer sections than that.