Anker 351 Power Strip Surge Protector Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple clip in mount for the Anker 351 Power Strip/Surge Protector.
- Rating
- 4.667 / 5
- Likes
- 67
- Downloads
- 481
- Makes
- 4
- Views
- 2,638
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this simple mount for the Anker 351 power strip/surge protector so you can mount it on the back of an entertainment center, the wall, on a desk top to simply prevent it from moving, or in my case to mount it under my desk.
Even though this was designed for the Anker 351, it will work for any power strip that has the following measurements (depending on the plugs placement):
- 27mm thick
- 106mm wide
I purchase this surge protector on Amazon and does not have a model number listed on the product listing, but it's printed on the bottom of the surge protector itself. Here is the link (paid link) to that product in case you want to verify it's the one you have OR if you need to purchase it!
I used #4 x ¾" screws to secure mount which worked great for my application (securing to solid wood desk). If you're securing to something such as drywall you'll need longer screws.
It's easiest to secure by applying mounting tape to the back of both mounts. Stick to the surface and carefully slide the surge protector out. The mounting tape will keep it in place for you to drive the screws.
Print Settings
- Printer Brand: Creality
- Printer: Ender-3 v2
- Rafts: No
- Supports: Yes
- Resolution: .2 mm
- Infill: 20%
- Filament brand: Hatchbox
- Filament material: PLA
Below is an image to show how I have the print set in the slicer to which I feel is the best way to print this mount.
***UPDATED 7/5/23 - Made the countersink on the screw holes a little wider and deeper to ensure screws are flush with bracket***