Ubiquity Flex Mini HSW
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sturdy mount for the Ubiquity Flex Mini to the Honeycomb Storage Wall
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 58
- Makes
- 0
- Views
- 721
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
I messed around with HSW shelves for my Ubiquity Flex Mini but it was never secure. Every now and then I would see it had shifted on the shelf from the Ethernet cables shoving it around.
So I made a secure casing that'll hold it against the wall without stiff cables moving it around. In my case I'm powering it from a PoE switch, but I've made a cutout in the back for a right angled USB-C cable to be plugged into the back if so needed, while still gripping the Flex Mini securely.
Print it as it is in the STL - noting that there are two bridges that are unsupported. If you're not comfortable with your printer's bridging ability you can add supports but in most cases a correctly tuned printer will have no issue printing it without supports.