Ubiquity Flex Mini HSW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy mount for the Ubiquity Flex Mini to the Honeycomb Storage Wall
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 721
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I messed around with HSW shelves for my Ubiquity Flex Mini but it was never secure. Every now and then I would see it had shifted on the shelf from the Ethernet cables shoving it around.
So I made a secure casing that'll hold it against the wall without stiff cables moving it around. In my case I'm powering it from a PoE switch, but I've made a cutout in the back for a right angled USB-C cable to be plugged into the back if so needed, while still gripping the Flex Mini securely.
Print it as it is in the STL - noting that there are two bridges that are unsupported. If you're not comfortable with your printer's bridging ability you can add supports but in most cases a correctly tuned printer will have no issue printing it without supports.