Tag Connect Retaining Clip for 6 pin and 10 pin debug probes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3d printed retaining clip for tag connect debug probe.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 256
- Makes
- 1
- Views
- 1,318
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a 3d printed retaining clip for tag connect debug probe.
This is because the clip provided by tag connect is expensive.
Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf
This openscad design used my previous protective cap for tag-connect in https://www.thingiverse.com/thing:3025584 as the base. But without the loop and with tighter tolerance for the alignment clip, so it can friction hold the alignment pin.
This is a work in progress, I will print this out soon to confirm if it works well as a retaining clip.
V1 :- Works well with PETG filament. PLA is a bit too soft.
Print instructions
Unassociated tags: debug probe
Category: Tools Summary
This is a 3d printed retaining clip for tag connect debug probe.
This is because the clip provided by tag connect is expensive.
Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf
This openscad design used my previous protective cap for tag-connect in https://www.thingiverse.com/thing:3025584 as the base. But without the loop and with tighter tolerance for the alignment clip, so it can friction hold the alignment pin.
This is a work in progress, I will print this out soon to confirm if it works well as a retaining clip.
V1 :- Works well with PETG filament. PLA is a bit too soft.
