Ender Pro Raspberry Pi Touchscreen Mounts for Smart Pi Touch 2 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two simple brackets to attach official 7" touchscreen to Ender Pro type frame.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 639
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
It's an odd-use case and probably won't get much love, but I had the screen lying around unused. These two brackets allow you to attach the Smart Pi Touch 2 screen case (with Raspberry Pi and fan on the back). It'll allow for some angle adjustment while clearing the bed. Ensure that you modify the Y-axis screws to be face down as pictured if necessary. You'll also need some feet with approximately 56 mm of height. The feet picture are here: https://www.printables.com/model/311256-ender-3-pro-isolation-feet-for-racquetball-56mm-di.
You'll also need one 3mm x 8mm long bolt and two 3mm x 16mm long bolts and 3x t-slot nuts. The bolts from the case kit are used to attach the brackets to the screen. Nuts press fit into hex indentations.
This will work with the Ender 3 Pro but not the Ender 3 since it has a smaller Y-axis extrusion. It should work if your printer uses 4040 extrusions that are spaced apart: 33mm vertically from top face to top face and 145mm in the X-direction from left face to left face.
Printing the right bracket requires a bit of support and the left bracket is a bit worse. I've included an orientation that worked on the left bracket, I love those organic supports!