Fysetc Spider with stacked Mellow Fly 5160 Pro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A DIN rail bracket for a Fystec Spider with the option to add a layer for two Mellow Fly 5160 Pro stepper driver
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 49
- Makes
- 0
- Views
- 887
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans.
Each layer can use either m3 nuts or screws (see photos).
No supports needed for printing.
Requirements:
This bracket uses the two of the Voron DIN rail clips from: https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl
It is possible to use more than 2 clips, but if the outermost clip positions are used, there is no space left to properly tighten the screws.
Hardware:
For each DIN rail clip 2x m2x10mm self-tapping countersunk screws are required.
If you just want to use the Fysetc Spider bracket you will need:
- 4x m3x8mm screws and 4x m3 nuts
For the complete setup following is required:
- Fysetc Spider bracket: 4x m3x10mm screws and 4x30mm standoffs
- 5160 pro bracket: 4x m3x10mm screws to mount it to the Spider bracket and 8x m3x10mm screws, 8x m3 nuts and 8x25mm standoffs for the fan brackets
- For each fan bracket: 4x m3x10mm countersunk screws and 4x screws according to the fans you use