BTT Octopus and Raspberry pi 3B+ for Weedo x40
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Uses the old mounting points to mount a BTT Octopus and Raspberry pi inside the electronics housing.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Octopus Mount:
Requires 8 M3 bolts (4 of which can be used from the original board mounting).
Also uses 4 M3 nuts that press-fit into the hexagonal holes on the bottom. To install the nuts align them with the holes and then flip the part upside down so the nuts are on a table and then press down, they should snap into place.
Raspberry pi 3B+
Similar to the octopus mount, 8M3 bolts are needed and 4 M3 press-fit nuts are used. Also has a 'filler' that fills the void otherwise left by the screen. **Note some sanding and/or filing may be needed on the slot for the filler part on the mount because the dimensions and alignments are not perfect.