HexCase Arduino Mega2560
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.94 – €1.15 net (excluding VAT)
For file: Top_Hex_0.2mm_PLA_MK3S_1h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.05 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.15 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed a case for the Arduino Mega 2560, because the ones I found, didn't fit the non-original boards I got.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 240
- Makes
- 3
- Views
- 898
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards.
Case should lightly snap together, bottom half got two 3mm holes to fix it to something.
You can get the lid to snap/locate on an FDM Printer, but Resin would probably work better.
Enjoy your Arduino project!