1 / 2
HSW Tape Holder (38x15 mm) — image 1
1 / 2

HSW Tape Holder (38x15 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small tapes holder for Honeycomb Storage Wall.

Rating
4.5 / 5
Likes
120
Downloads
390
Makes
3
Views
1,605
Reviews
2

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

Small tapes holder for Honeycomb Storage Wall. Designed for tape rolls 15mm wide, and with 38mm internal diameter (e.g., electrical tapes). Attaches to HSW M3 insert with an M3 metric screw (requires also an M3 hex nut).

Inspired by @Super7's Tape Hook, but modeled from a scratch. 

HSW M3 insert is copied directly from @RostaP's insert-with-M3 model.

 

Print instructions

Print it with it's back down. No supports needed. 

I printed mine in PETG with 6mm nozzle, and 4mm layer height; however, any other combination of material, nozzle diameter, and layer height should work - this is a very simple model, so there are basically no restrictions.

Tags