HSW Small Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small hook for Honeycomb Storage Wall for hanging small stuff (e.g. ruler).
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 291
- Makes
- 10
- Views
- 990
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A very simple small hook for hanging small items (such as a ruler) to Honeycomb Storage Wall. Strong enough to carry multiple items. The diameter of the hook is 3mm.
There are 2 versions of the hook - a standard one; and a rotated one for Honeycomb Storage Walls that are mounted 90° rotated compared to the original orientation. Choose whichever version you have, just be careful not to swap them.
Print instructions
Print it with it's back down. No supports needed.
I printed mine in PETG with 6mm nozzle, and 4mm layer height; however, any other combination of material, nozzle diameter, and layer height should work - this is a very simple model, so there are basically no restrictions.