Xia Organizer with all Expansions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An Organizer for Xia and all Expansions with cards sleeved. Fits in original box with very minor lid lift (1-2mm).
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 104
- Makes
- 0
- Views
- 1,129
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An Organizer for Xia and all Expansions with cards sleeved. Fits in original box with very minor lid lift (1-2mm).
Print instructions
Most printed at .3 layer height with minimal infill ~10%.
Slicer wouldn't print the mesh on the ship boxes at .3 so either print at .2 or vary the layer height and print the mesh at a lower setting only.
I'm new to 3d modeling and all my STL seem to import facing the wrong way. Be sure to rotate onto the build plate. All print in the same orientation as they pack (note this means the ship boxes print with mesh backs on the build plate).
I only needed supports on the TierI ship holder and I had a hard time removing them. I recommend paint on supports only right around the U slot and configure your settings however needed to make removal easier.