2,729 models
Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…
Print approx. €9.65–€11.80 excl. taxPreliminary estimate for one variant
Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…
Print approx. €7.57–€9.25 excl. taxPreliminary estimate for one variant
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
These dont damage the cables like staples. they hold the cable securely but they cable is still loose enough that you can slide and ajust it even when fully screwed down. Enjoy! And If you have a minute, check out my other models!…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is a Xiangqi (aka Chinese Chess) board and pieces, targeting the Prusa Mini. It fits in the build plate by nature of being sliced into parts with connectors between. It is multi-colored based on layer changes (for the playing pieces)…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Riding a scooter this winter I often froze my hands. So I decided to design this handguard for scooters. I think it is compatible with all Xiaomi, I have tested it on mine which is a pro 2. In addition to protecting them from the cold,…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for PETGSource material: PET
Xiaomi Temperature and Humidity Sensor Holder by RSCtech You can use screw or glue to fix it. It keeps the sensor stable thanks to its design, even upside down. It can be easily removed when replacing the sensor battery.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
With this adapter you can use the side brushes from Xiaomi Mi Robot Vacuum Cleaner(or any other robot vacuum that supports screwable brushes) with your Xiaomi Mop Pro (styj02m). The tolerances are calculated so that the adapter is screwed…
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
I created this because I couldn't find a simple wall mount for my Xiaomi Oclean X toothbrush. After printing stick a double-faced adhesive tape (I used 3m tape) at the back and put it to the wall where you want it to be. Snaps to the…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET
Un support de camera Xiaomi 360 full HD pour la Prusa mini+ je me suis inspiré d’un support déjà existant : " https://www.printables.com/model/116032-prusa-mini-camera-mount " j'ai également récupéré le fichier du socle de caméra"…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Cool and ergonomic stand for a popular smart watch Xiaomi HAYLOU Solar (LS05). The stand can be printed with or without supports. For this, several options for STL files are provided. ls05-A.stl and ls05-B.stl - are not require support.…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
Xiaomi Mi Qi charger Print instructions Printed with PETG 0,2mm, with support, 8h 12min.
Print approx. €6.85–€8.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a gridfinity-compatible cradle for the Xiaomi Aircompressor (only version 1 unfortunately), so you can store your compressor along with all your other gridfinitized bike tools. Dimensions: 5x2x2
Print approx. €4.74–€5.80 excl. taxPreliminary estimate for one variant
Model náhradního pantu pro box prachu.
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Outdor camera holder Xiaomi CW300 for a pole or tree with a diameter of 12 cm, for an outdoor socket box fastening using 16 mm stainless steel straps and clips
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for PETGSource material: PET
The case for the Xiaomi Aqara thermo and humidity sensor to hang in my greenhouse. Obal na zaveseni Aquara cidla teploty, tlaku a vlhkosti do skleniku.
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
This model was necessary to clear up my desk space, to get stuff off the table. Parts For assembly you will need: printed parts For parts print the following: 1 x xiaomi_MIjia_support.stl Assembly There is no assembly needed for the…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
To help it not splash, reusing the original drop tray cover plate. Recommended to print in PETG or ABS or something else High temperature. Modelled by a Human in Autodesk Fusion
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for PETGSource material: PET
________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
I recomend glue on Bed for Flex and PETG. It helps alot!
This is probably just about the smallest triaxial tourbillon mechanism that one can reasonably make with a .4mm nozzle. It's powered by a sping motor at the bottom an fits within a 96mm sphere. The only non-plastic parts are a couple of…
Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing. The Axial thrust bearing combined with a rigid lead-screw compression coupler completely eliminates Z-axis banding caused by the stepper motor “wobbling” under the weight of…
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
This is a fully playable open-hole "Irish" flute in the key of D. It has no keys. Intonation is good, staying in tune with other flutes videos I found on the Internet. To me, it sounds like a wood flute. I was able to play D and G major…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
Updates 13/07/2024 - Added bottom with holes 05/10/2023 - Added filet to the case ---------------------------------------------------------------------------------------------------------------- Case for Seeed XIAO ESP32-S3. Used STEP…
inporved design for a phone case for xiaomi redmi note 11.
This is a simple case for the Seeed Studio XIAO-ESP32-S3. It has an option with an extra plank that you can stick the external antenna onto. The lid snaps on without any screws or glue. This is an initial model for basically the device…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
A mechanical digital clock with three digit wheels on different axes (X, Y and Z) from each other. Visually crazy but practical Driven by a single stepper motor All parts are designed within 180 x 180mm Easy time adjustment by manual…
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
Seeed Xiao BLE snap fit case with reset button, designed to be used as a dongle/central device for ZMK Firmware. Updates 06/01/26 - removed unnecessary features, small tweaks; added step files 10/12/24 - added ejecto 🚀 hole for easier…
my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.2 - 0.28 Walls: 3 Infill: 10% Material: Brand: Kingroon Material: PLA Color: green printed on Artillery Sidewinder X1
A simple tabletop stand for your Xiaomi Mijia thermometer 🙂 Printed in Hatchbox PETG (No supports required)
A collection of spacers for the most common axial fan sizes. 120, 92, 80, 60, 40 and 30 mm The STL files have the spacer with a height of 100 mm, so you can use the Z-scale in the slicer to give it the exact height in millimeters that you…
Xiaomi Redmi Note 12 case with differents models
Driveshaft for 1/24 scale crawler axial SCX24 and Probably AX24. First pass so still a little rough but practical. Designed this so I could flip my motor/transmission around for more weight forward. Needed custom driveshaft lengths. I…
I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
Snap-fit case for Seeed Studio XIAO ESP32S3 UPDATE: Added STEP file for the model for future improvements and modifications by the community. Please respect the CC Attribution Non-Commercial license. Features: Snap-fit case, no additional…
2/21/21 FYI, To keep more up to date with what I'm doing I started an Instagram page @mcmaven.pdx, where I'm posting some of my 3D printing and other designs that I haven't posted here. Triaxial Tourbillon Clock Build Notes: (Download the…
Угловое крепление к стене для камеры Xiaomi Mi Home Security Camera 360 Category: Camera
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
Originally published here: Xiaomi Redmi Note 8 Pro m1906g7 case by tato_713 - Thingiverse This case is for the phone Xiaomi Redmi Note 8 Pro , which model number starts with "m1906g7", it will not work with Redmi Note 8 T or the regular…
I needed a support for the new Mibox S (which is a bit slimmer than the previous version), so I modified NirDobovizki's design ( https://www.thingiverse.com/thing:2754331 ). Print instructions Category: Organization Summary I needed a…
The Xiaomi 13T already comes with a clear bumper case out of the box, but I wanted to give it a more personal touch. So, I designed this custom case. The case can be printed from TPU with a Shore hardness of 95A or more. The frame around…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
Here is Gundam Exia Mask. Print instructions Category: 3D Printing
This is a lid of a Xiaomi Mi TV Stick's remote. On mine the little nozzle on the front broke off so i had to make this for me. Print it standing up on the flat tilted back part to get the best results. (Lay this flat part on the printbed)…
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
Because I couldn't find any stl file for a phonecase for this phone I disigned my own. It is not perfect but it works.
COMMERCIAL LICENSE ACCESS is available through a patreon membership where you help support me and get commercial license which applies to all my models except remixes i made from others work. https://www.patreon.com/Dengamleninja
Seeed Studio XIAO ESP32-C3 adopts new RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. For Internet of Things applications, you will find it is flexible and suitable for all kinds of IoT scenarios.…
Remixed with the intention to use the Xiao Sense camera as a facial tracker with Project Babble.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO nRF52840, which is an Arduino & CircuitPython capable Nordic nRF52840 board with Bluetooth 5, BLE and NFC that comes with an onboard antenna and costs around $9.90. The product…
Holder for Xiaomi Wiha screwdriver set to attach to Ikea Skadis pegboard
(Description from original author) WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the…
I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle. All you need is the two printed components and 2 wood 3x16mm screws. Note: the lock has 4 holes in…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
Case for Small RP2040 Boards This is a case for the small RP2040 boards such as the Adafruit QT PY RP2040 or the Seeed XIAO RP2040. These small boards based on the Raspberry Pi RP2040 microcontroller. They have a USB interface and are…
Originally published here: Xiaomi Redmi Note 10 & 10S m2101k7 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention…
It's a wallholder, it adheres to the wall using doublesided tape. Edit 2024: added a hole for a thumbtack.
Rebuild from @Thomas_63847 model
In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height. Compatible with: Mi Scooter 1S Mi Scooter 2 Pro Mi Scooter 3 M365 Pro (use…
This is a strange use case: use a traditional vacuum cleaner to clean a robotic one. The official robot cleaning guide says you have to clean the dusty filter with tapwater. If you do so you close the pores of the filter by creating a…
This 3D-printed case is designed to complement the Xiaomi 13T Pro with a snug fit and minimal aesthetic. Every detail is optimized for easy access to buttons, ports, and the camera while offering reliable protection. Features: Precision…
If you're looking for a place for your remote to wait for you - you found it :) This little stand is designed for the Mi Box S's remote. The shape follows the remote's design and matches the box's appearance as well. The remote stands at…
Originally published here: Xiaomi Redmi Note 9 Pro / S case by tato_713 - Thingiverse This case is for the Xiaomi Redmi Note 9S and 9 Pro, but not for the Redmi Note 9 (it's a bit wider). Some of the models are designed for rigid…
WHY? The existing AMS dryer pods by STprinting are great for the outsides. For the middle slot, I needed something to fit my Xiaomi Mija Hygrometer , of which I had a couple lying around. UPDATE v2 Based on your feedback, I strengthened…
Replacement Bracket for Xiaomi 360 Camera Supports are needed, as you can see in the photo. Remix of: https://www.thingiverse.com/thing:4485916
A camera case for the Xiao ESP32S3 Sense to use it as a printer camera. The housing is designed so that as much air as possible can flow through and the ESP32 does not heat up too much. Additional Materials 4x Screw M3X8 There are…
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
Loved the hot rod Ossum made so much I had to make one. I wanted it to be functional as an actual rock crawler so I put most of the weight up front and down low for steep climbs. I designed it to work with an axial ax10 wraith or scx10…
If you want to put it on a slightly curved surface (for example, the back of a monitor/tv), use the thicker foam tape, and just attach a strip on each edge of the back.
The bracket features 2x 4mm mounting holes for screws to mount the bracket to a wall. There’s a hole underneath the camera for a standard ¼” screw to mount the camera to the bracket. The bracket has a slot in the bottom for the USB-C cable.
The Xiaomi Mi mini vacuum cleaner is a nice little and affordable tool. However, it comes with only one nozzle. To reach small areas and especially to clean my printer enclosure from plastic debris, I have designed this small tube nozzle.…
Bottom is flat. Case is tested. Best printed slowly in TPU.
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
I was using one of the other anti vibration pads but they kept falling off, and I keep losing them. This design uses the main screw to keep it all in place but requires a 5mm hex tool to remove the screw, but it takes less then 5 minutes…
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…
Update 25 October 2025: I have uploaded a step file of the standard back plate for your adjustments and ideas. Since the adhesive version of the back plates of the Xiaomi Aqara temperature / humidity / pressure or vibration sensors…
Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…
This is a repository of .stl files that were used in the creation of a prototype axial flux synchronous reluctance motor. The video showcasing the motor can be found here: https://www.youtube.com/watch?v=SNQVJudd6BU Since the reluctance…
A case for the Xiaomi Poco X6 or X6 Pro. I made mine in TPU 95A, settings included.
Xiaomi and Aqara: shame on your for designing the worst battery cover case ever - impossible to open. This model is a screwdriver for this… Opening this sensor is an horror: The little screwdriver will print in 10-15 minutes. I printed at…
This mounting bracket attaches the Xiaomi Mijia Bluetooth thermometer to an IKEA SKÅDIS pegboard . The thermometer is held from each corner and can be removed easily if needed. The model consists of two parts: A frame holding the…
Gundam Exia compatible with Dummy 13.
This piccolo was given away by @axianoff_2745170 as a free promotion when the Axianov Irish Flute was first released. Thanks to work from @Roman_2878361 and Anna Bryusova , these original STL files are now available to download! Skip…
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6 , designed for a stable Zigbee router / range extender setup. Features USB-C access SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail) No…
Desktop stand for Xiaomi LYWSD03MMC temperature and humidity sensor. Original design by the thingiverse user pasiz I modified it for a better fit, the original was kind of tight.
Should print fairly similar to the original design, I found my best results though at 0.16 layer height and printing the parts at an angle of XYZ 90, 45, 45. I think 0.2 layer height would work fine as well. Using the auto-orient feature…
🧩 Hexiamond Puzzle The puzzle consists of 12 pieces and a storage box with a sliding lid. Each piece consists of six equilateral triangles. The puzzle pieces are used on both sides. There are 55 solutions to the puzzle shape shown, not…
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
Folding hood to direct the outflow of air from your Xiaomi Air Purifier to be able to use it as a fan. The hood allows directing the air flow from parallel to the ground at about 60º upwards. A small key allows to fix the position of the…
This is a simple enclosure I created for the Seeed Studio XIAO nRF52840 Sense with a hole for a male USB-C connector. Even though it was designed for the XIAO nRF52840 Sense, it should also work with the standard BLE version as their…
This “Fat Man” variant expands on Rames original design by extending the back to provide a place to house the wiring for the IR LEDs as well as some small thru-holes to route those wires through to drive the LEDs, which can be press-fit…
Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.
