XIAO ESP32-C6 Zigbee Router Case (Split Lid, SMA External Antenna)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ventilated case for Seeed XIAO ESP32-C6 with split lid, USB-C access and SMA bulkhead mount (u.FL→SMA pigtail).
- Rating
- 4.5 / 5
- Likes
- 50
- Downloads
- 541
- Makes
- 3
- Views
- 2,005
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6, designed for a stable Zigbee router / range extender setup.
Features
USB-C access
SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail)
No screws required
Can be mounted with double-sided tape (e.g., 3M VHB)
Hardware / BOM
1× Seeed Studio XIAO ESP32-C6
1× u.FL → SMA bulkhead pigtail
1× 2.4 GHz SMA antenna
Double-sided tape (recommended: 3M VHB)
Assembly
Carefully snap the u.FL connector onto the XIAO (press straight down).
Place the XIAO in the base and align the USB-C opening.
Insert the SMA bulkhead into the hole and tighten the nut.
Screw the antenna on.
Close the lid.
Mount the case using double-sided tape.
Printing
Layer height: 0.2 mm
Perimeters: 2–3
Infill: 15–20%
Supports: none
Material: PLA or PETG
Firmware
I’m currently using a modified Arduino example(Zigbee Range Extender (router) for XIAO ESP32C6) . I will publish the exact sketch + flashing steps soon (link will be added here).