XIAO ESP32-C6 Zigbee Router Case (Split Lid, SMA External Antenna)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ventilated case for Seeed XIAO ESP32-C6 with split lid, USB-C access and SMA bulkhead mount (u.FL→SMA pigtail).
- Ocena
- 4,5 / 5
- Polubienia
- 49
- Pobrania
- 533
- Wydruki
- 3
- Wyświetlenia
- 1952
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a compact ventilated enclosure for the Seeed Studio XIAO ESP32-C6, designed for a stable Zigbee router / range extender setup.
Features
USB-C access
SMA bulkhead mount for an external 2.4 GHz antenna (via u.FL → SMA pigtail)
No screws required
Can be mounted with double-sided tape (e.g., 3M VHB)
Hardware / BOM
1× Seeed Studio XIAO ESP32-C6
1× u.FL → SMA bulkhead pigtail
1× 2.4 GHz SMA antenna
Double-sided tape (recommended: 3M VHB)
Assembly
Carefully snap the u.FL connector onto the XIAO (press straight down).
Place the XIAO in the base and align the USB-C opening.
Insert the SMA bulkhead into the hole and tighten the nut.
Screw the antenna on.
Close the lid.
Mount the case using double-sided tape.
Printing
Layer height: 0.2 mm
Perimeters: 2–3
Infill: 15–20%
Supports: none
Material: PLA or PETG
Firmware
I’m currently using a modified Arduino example(Zigbee Range Extender (router) for XIAO ESP32C6) . I will publish the exact sketch + flashing steps soon (link will be added here).