1 / 5
Camper Flash Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To do multi color you'll need to look at the layers in your slicer and figure out when to switch filament.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 71
- Makes
- 0
- Views
- 1,673
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
To do multi color you'll need to look at the layers in your slicer and figure out when to switch filament. I glued the center to 1 side, then glued the flash drive in place before gluing the final side. This allowed me to make sure it was exactly where i wanted it. Used a mini screw eye from a frame hanging kit for the actual keychain part. Cut the heads off 2 finishing nails and heated them up and pushed them through the final 2 holes for re-enforcement on the key chain.