Street Fighter II Pinball Replacement Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement car for the car crunch lower playfield in a Street Fighter II pinball machine. I added led…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 59
- Makes
- 0
- Views
- 673
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement car for the car crunch lower playfield in a Street Fighter II pinball machine. I added led headlights that activate when the lower playfield is in use. There are three hood styles but the overall dimensions are the same.
Additional parts for adding headlights:
1n4003 diode
2 Strand 18ga wire, about 30 inches total
thin solid core wire
2 - 5630 smd led ( I pulled mine from a warm white 12v led strip )
6.3v pinball led or resistors for the led's. I used the pinball led so I would get ac/dc rectification
I used perf board to mount it but you could skip that
spring wire clip
2 alligator clips
1/16 drill to add holes for led connection wire to pass through
I used a piece of felt as a buffer between the front plate and the car and a piece of craft foam between the back of the car and the plunger rod.
Video of it installed in my machine. https://youtu.be/LN_5KJ0Pdms
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
Adaptive .15 +/- .05
Infill:
60
Filament: 3DDPLUS PLA Red
Category: Toy & Game Accessories