Spool Winder with Drill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For quickly wind your filament with a drill. With 10 mm or .5 inch axel. 3 sizes
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 386
- Makes
- 3
- Views
- 2,455
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Wanted a way to wind filament on another spool, or after measuring what's left on the spool, to see if there's enough for the project. Printed without support.
The taper cones should fit almost any size of spools.
You have 3 choices of length (160, 190, 233 mm), depending on the spools you use. The end of the "Shaft-bolt" as a handle to ease the free unwinding operation.
There are 2 different axles to be used; A metal 10 mm from rod or old drill bit, that's the one I use (see pictures), or a .5 inch axel to be printed and put inside the end of the Shaft-Bolt.
I made a “Manual Locking Wing-nut” if you want to secure the main Cap-nut
Printed in ABS for strength at .16mm layer height to have nice threads.
Hope to see your make.
Happy printing.
