School Paint Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.56 – €5.57 net (excluding VAT)
For file: school-paint-tray-4_1_02mm_petg_mk3s_5h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.07 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 5.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Kids love to paint, and when they paint, the need a little squirt of each color.
- Rating
- 5 / 5
- Likes
- 134
- Downloads
- 463
- Makes
- 4
- Views
- 1,697
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
Kids love to paint, and when they paint, the need a little squirt of each color. The kids in the school love these little ten pot paint organizers.
Your little ones will love them too.
When the day is done, it's easy clean up in the dish washer because they're printed in PETG.
Print instructions
Print in PETG as shown - bottom is flat
Use low infill % - 10% or so is about right for strength.
Use glue stick - the model spans the entire MK3s bed centered - so stripe up a big circle before printing for easier release.
Note - the words "Garden Ridge" are lightly embossed into the center well - that's the name of the preschool that I made these for. I've provided the STL/3mf so if you want to zap that out, you can.