Console lamp, E14 socket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small lamp that can be affixed to the top or side of a console (or to some shelf ; do as you like).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
WARNING this must be used with LED lightbulbs. It has been tested with regular/old fashioned lightbulbs, and will melt. You have been warned.
Had to change two spotlights from our bathroom, so did this little contraption. It can be oriented in almost all directions.
Tested with E14 socket, I think the outer size of E27 is the same, so it should work (but untested).
The lamp shade should be printed in transparent PETG, read https://www.printables.com/model/15310-how-to-print-glass to fine tune your slicer. Note the STL orientation is wrong, the side arms should be on the print plate.
2023-08-13 update : added another lamp shade shape.
Non-printed parts :
- one M4x15 (or longer) for the socket holder ;
- one M3x6 (or longer) to block the arm into position ;
- two M4 screws to fix on the console.