Voron 0.2 CHC V6 Hotend Mount (Ceramic Heater Core)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hotend mount for the Voron 0.2 to use a CHC V6 Hotend Mount (Ceramic Heater Core)
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 124
- Makes
- 0
- Views
- 1,559
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
A mount for an affordable CHC hotend from Aliexpress to mount on the Voron 0.2. Needs to be printed in ABS/ASA or comparable.
A bit of manual work is required since the top needs to be cut off where the heatsink gets thinner (see second image) and four M2.5 holes need to be drilled and tapped. A drill guide is included as well.
Don't forget to recalibrate the thermistor after you change the hotend. I was able to print a 20 minute Benchy in PLA with the hotend so I'd say it works pretty well. The calbles are way cleaner than with a generic V6 hotend.