5mm Door dogging key/Allen Wrench
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.25 – €0.31 net (excluding VAT)
For file: EN3PRO_5mm Hex Key Key.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.28 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a 5mm dogging key for unlocking and locking pushbars on doors. Can also be used for emergency bicycle adjustment
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 176
- Makes
- 2
- Views
- 826
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
5mm hex key/allen wrench for locking and unlocking or dogging and undogging pushbars on doors. At least that what I needed. Maybe you just need a 5mm allen key on a keychain. Who am I to judge. If you're using this for doors, there are various sizes so confirm what you need. I didn't need it very long and wanted it to blend in with the other keys on my keychain. The hex key part is only 35mm long which is roughly the size of a standard house key.
This may also be useful for adjusting parks on a bicycle in an emergency.
I printed it at 100% fill to give extra strength.
0.54g and about $0.03 YMV.