1 / 5
Doorstop
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A doorstop / door wedge that can be mounted on the door when not needed. Parametric FreeCAD model included.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 73
- Makes
- 1
- Views
- 253
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This doorstop / door wedge has a fixed place to store it when you don't need it. You don't need to search for it when you need it, and it's not just lying around on the floor.
The door wedge works best with rebated doors (in German: gefälzt).
Note: The attached STL file will likely not fit your doors. Comment if you need other sizes, or generate them yourself using the attached parametric FreeCAD model.
Print on the side for best stability. Here some recommended print settings:
- Layer Height: 0.2mm
- Supports: No
- Brim: Yes
- Infill: Doesn't matter