1 / 5
Ender 3 (pro) Hemera XS (revo and not revo) plate. No X lost. BL-Touch & Noctua 4020 — image 1
1 / 5

Ender 3 (pro) Hemera XS (revo and not revo) plate. No X lost. BL-Touch & Noctua 4020

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount plate for the Hemera XS that doesn't make you lose X-gantry. Fits a Noctua 4020 and BL-Touch or CR-Touch.

Rating
0 / 5
Likes
7
Downloads
78
Makes
0
Views
713
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I saw several designs for the Hemera XS that fitted the ender 3 (and other creatility printers) but they always have the same problem: you lose X gantry, or if you didn't they didn't accommodate for a Noctua 4020 Fan.

Features

  • Works in an Ender 3 and Ender 3 Pro stock mount plate
  • This will work in other printers that use the same hotend mount plate such as CR-10 and Ender 5 (and variations)
  • Fits BL-Touch and CR-Touch (and most likely clones)
  • Fits the hemera stock 4010 fan or a 4020 one. I use a noctua for silent run.
  • Uses the 4 mounting points in the Hemera (instead of only 3)

 

Caveats

You will need two regular M5 nuts to replace the stock ones. 

I could not find a way to prevent losing X or Y gantry space without having to compromise in replacing the stock M5 nuts.

Because the regular M5 nuts are not lock nuts you will have to take a look from time to time to check they didn't get loose. Once a month should be more than enough (or too much).

How to Print

Print the flat side to the bed. No supports required. I printed with 3 perimeters, 3 top layers, 3 bottom layers and 15% infill.

It is HIGHLY recommended you print this in PETG. If you print this in PLA most likely it'll bend over time because of the stepper motor and hotend heat. This apply to any other mount plate you want to plate for the Hemera, not only this design.

How to assemble

You will need two regular M5 Nuts for this.

Prepare the Hemera and plate
  • Insert the two M5 nuts in the designated top spaces. They'll tight fit but should not be loose.
  • Insert the stock M5 lock nut in the designated bottom space.
  • Fully assemble your hemera (including the fan). 
  • Insert the M3 square nuts that come with the Hemera in their space.
  • Use 4 M3x7 button head screws to secure the Hemera to the plate. IMPORTANT: do not use taller screws. you will break your Hemera mounting points. Do not over tight.
  • This is also a good moment to mount your BL-Touch (detach the cable) but just because is easier, you can also mount it once in the hot plate.
Prepare the hot plate mount
  • Remove the wheels from the hot plate mount.  No need to detach the belt but you can do it if you find it easier.
  • Requisite: the Hemera already attached to the mount (see previous section)
  • Mount the two top wheels so the screw screws itself to the M5 nuts in the plate. Remember the order for the wheel is: Screw, wheel, spacer.
  • Mount the bottom wheel (the one with the eccentric wheel). Remember the order: Screw, wheel, eccentric nut (the small circle facing away the wheel).
  • Tighten All wheels well
  • Tighten the eccentric nut as required
  • Connect all the wires.
  • Use a zip tie to organize your cables.

Important: Monitor your BL-Touch the first time you home your printer, if it is too high and your nozzle might hit the bed use two M3 nuts in between the BL-Touch and the mounting point to lower it (or use the provided step file to modify the design as you see fit).

 

Best luck!

Tags