1 / 3
Creality K1 Back Fan carbon filter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small addon for the back fan of the Creality K1
- Rating
- 5 / 5
- Likes
- 75
- Downloads
- 314
- Makes
- 4
- Views
- 3,974
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small addon filter for the back fan of the Creality K1.
I've used 2 60x60x3mm activated carbon filters, for the 6,5mm Version
You need:
- 4x 3x22mm (wood)screws
- 4x spacer or 2mm thick washers
- 1x Main
- 1x Guard
- 2/3x 60x60mm activated carbon filters, I've cut mine out of a replacement of a fume hood
Should be printable without support.
If you are placing the filter as I did, with the open side of the “Main” to the top, then you may need to wedge the “Main” a bit open to insert the “Guard” since the motor is in the way.