Lowered Chimney Design to lower PTFE tube intakes into the Prusa box to reduce bends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lowered the height of the chimney mount on the Prusa box so PTFE tubing goes more straight down into the Prusa Box
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 342
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I converted my Spool Tank from the detachable PTFE tubing first original design, to the permanent tubing, using the bigger PTFE tubing and also using the intake attachments that are vertical allowing the PTFE tube to run straight down. I also redesigned the chimney base part to be 20 mm lower than the original design, so that the tubing that comes out of the spool tank can come out more normally straight down rather than the original design. Overall the friction on the filament is now significantly reduced than the original design I started from.
The PTFE holder I used is ptfe_holder_vertical_3.2-4.8_v1.STL
The part that I mounted on top of the new lowered chimney design is PB_filament_door_top_v2_slim_cover_7xPTFE_3.2-4.8.STL