Protopasta Lamp base + DIY customizable shade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We hope this fun lamp design brightens your day! 3 lamp shades provided for your enjoyment and to demonstrate what's…
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 175
- Makes
- 1
- Views
- 988
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
We hope this fun lamp design brightens your day!
3 lamp shades provided for your enjoyment and to demonstrate what's possible.
Design your own lampshade following this tutorial: https://youtu.be/MGb4gvUI7M0
Lampshades are 3D printed with Protopasta's Bottle Brown, Cobalt Blue, and Soda Green Translucent HTPLA filaments available at http://www.protopasta.com. For sturdy, but still translucent shades, we recommend the following settings:
extrusion width: 0.9 mm
layer height: 0.4 mm
speed: 20 mm/s
We print with no slowdowns using spiralize (vase) mode for a continuous extrusion with no start/stop defects.
The base can be printed with typical settings like:
extrusion width: 0.42-0.63 mm
layer height: 0.15-0.25 mm
speed: 20-30 mm/s
2-3 walls
4+ top/bottom
and infill for support
We recommend printing upside down.
Here is a link to fixture used for lamp: https://a.co/d/aUivaHm
We used a standard LED bulb. Be careful not to select a hot bulb that melts that plastic. Consider a dimmable bulb to adjust the light level to your preference.
Design commissioned and inspired by June's Endless Pastabilities Filament Subscription. Subscribe to support future designs and get 3 new Protopasta colors every 2 months: https://www.proto-pasta.com/products/endless-pastabilities
More about Protopasta x CM Design Collaboration at Protopasta.com/blog
Enjoy creating your own lamp! Can't wait to see what you make!!!
All our best,
Alex and the Protopasta Team
Category: Decor