Diagonal bicycle wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pedal holder & wheel mounts for mounting a bicycle diagonally from a wall.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 94
- Makes
- 0
- Views
- 1,417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Pedal holder & wheel mounts for mounting a bicycle diagonally from a wall.
Would suggest making adjustments to the pedal holder via the cusomizer section that is specific to your bike. Basically make it narrower and shorter to accommodate your specific pedals. Also I left space for an image to be cut into the part, but it increases rendering time 100x so I commented it out. You need to find an image, I just used a bicycle line-art I found.
Would consider adding a 2nd screw hole to the pedal mounts as well as they tend to twist a bit.
Print Settings
Notes:
There was a lot of concern from colleagues over whether or not the parts would be strong enough to hold a bicycle, so I personally printed with Nylon at 50% fill on the bases and 30% fill on the pedal holder. The pedal holder is a bit too flexible, so I'd suggest printing at higher fill (or narrower/shorter). I've also printed a single pedal holder in ABS at 70% fill and have absolutely no doubt that it's strong enough. Could probably get away with a lot less fill on these.
Post-Printing
Category: Sport & Outdoors