1 / 1
Bicycle brake lever (low profile)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A low profile 3D printable brake lever. Printable without supports!
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 127
- Makes
- 1
- Views
- 880
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have used this brake on my fixed gear commuter bike since september 2021 and it has worked great. I do not recommend this for serious cycling (mountain bike or road cycling) but for commuting it is perfectly fine.
Printing instructions:
- Print with as many perimeters as possible (I used 7 with a 0.5mm nozzle).
- I printed everything in PLA. I recommend silk PLA for the lever, since it is strong but less brittle than regular PLA.
- Does not require any supports when printed in the orientation of the picture below:
Required hardware:
- 14mm M5 bolt + normal nut (for the clamp)
- 30mm M4 bolt + nyloc nut (for the lever)
- (Optional) small M3 screw for reach adjustment
Assemble by placing the M5 nut in the slot before sliding the clamp over the handlebars.