Pistol grip camera for the Raspberry Pi HQ camera module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was an early experiment with a novel form factor for the Raspberry Pi HQ camera.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Building a Raspberry Pi HQ camera module into a pistol grip chassis. It's really hacked-together as a learning exercise for OpenSCAD, so it's by no means perfect. It's thus a work in progress, and some bits might improve over time.
Update 2020-07-01: improved locating foot and shoe tolerances.
Update 2020-07-07: Improved strength of locating shoe on handle
You'll need four M2.3x8mm self-tapping screws to fit the camera. The sloping top is designed to mount a Raspberry Pi in a case using Velcro strips. I'm using a cheap touchscreen for the interface. The handle can take a battery, its designed to fit two 18650s in holders but I use a single 18650 booster pack.
The pistol grip screw cap uses the necks and caps library by [Xavan], under a CC BY 4.0 licence, from https://www.thingiverse.com/thing:1654620
All OpenSCAD files as well as ongoing work with software can be found at https://github.com/JennyList/PistolGripCamera
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
Draft
Infill:
20%
Filament: Generic PLA
Category: Camera