DJI (Mavic) Mini1/2 Camera Shade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm…
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 398
- Makes
- 1
- Views
- 1,407
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation.
Since I dont have the original file, the mesh looks still not perfect but you can print it in place and get a perfect fitting stable camera shade that also protects the camera from slight crashes.
Special thanks to @MagicFred, the original designer.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
0%
Filament:
eins3D ABSBlack
Notes:
I printed this in ABS which is light but stable. I used only walls and no infill. Print it as it is and make sure to only print supports as in the picture.
Category: R/C Vehicles