DJI (Mavic) Mini1/2 Camera Shade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm…
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 398
- Wydruki
- 1
- Wyświetlenia
- 1407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation.
Since I dont have the original file, the mesh looks still not perfect but you can print it in place and get a perfect fitting stable camera shade that also protects the camera from slight crashes.
Special thanks to @MagicFred, the original designer.
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
Yes
Resolution:
.12
Infill:
0%
Filament:
eins3D ABSBlack
Notes:
I printed this in ABS which is light but stable. I used only walls and no infill. Print it as it is and make sure to only print supports as in the picture.
Category: R/C Vehicles