1 / 3
SparkFun MicroMod Input and Display Carrier Board Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for the MicroMod board, with button operators.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a 2 piece case for the SparkFun MicroMod Input and Display Carrier Board. The case was printed with PLA. The joystick and button operators are a bit small and were printed on resin printer. The two halves of the case sandwich the board and are secured with 4 M2.5x12mm screws.