Teigblume MD3DD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Own design , inspiration from the teigblume tm5 / tm31. This is for the kitchen machine thermomix TM5 and TM31.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Own design , inspiration from the teigblume tm5 / tm31.
This is for the kitchen machine thermomix TM5 and TM31.
Update for the TM31, you can shrink it 10% then it fits perfect.
i will update later with an separate file for TM31 ,
It helps toget the doug out off the tup. by twisting the knife . Mirror this for Righthanded use .
2 sorts i prefer the 40mm , is more friendly in use .
The designs on the net are not 3D-printer friendly , this one is printing without any support.
I made several from this, all in PLA , 40% infill 0.10mm hight with 0.30mm nozlle, works perfect .