Modified Waveshare 7 H case and Legs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified a great display case to fit a great Raspberry case ;)
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 165
- Makes
- 1
- Views
- 1,117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I wanted to use this great Raspberry case with VESA75: https://www.printables.com/model/106225-modular-snap-together-raspberry-pi-2b3b3b4-case-w-
together with the cool display case of @ywabiko: https://www.printables.com/model/85020-waveshare-7-hdmi-lcd-h-case
Several benefits:
- VESA75 and VESA100 have now larger holes for heat inserts
- added two legs that hold the display a bit more upright (70° with the desk plane)
- the raspberry case can be mounted in 4 positions, to allow for better cable management
- added shims (upper and bottom) to fit the raspberry case
- closed some holes of the case back, added more for better venting
BOM:
- 8x M3 brass heat inserts for all VESA holes (any is good, even 5.7mm long ones)
- 2x M3 8mm socket head screws that hold the legs
- 8x M3 12mm socket head screws that hold the legs and the display case togehter
Print the two legs, 2 bottom shims and 4 top shims, 3 perimeters and 15% infill should be fine. If you print the legs like in the picture, you do not need supports. See pic on where the screws go in.
I'm not gonna ask for a coffee, but please make sure you give me a like if you find this model useful.