Paramaterized Honeycomb Storage Feeler Gauge holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A feeler gauge holder for the Honeycomb Storage Wall, parameterized in OpenSCAD for your convenience
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 77
- Makes
- 0
- Views
- 895
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I found a few feeler gauges, one of which is really really close to what I wanted, but I ended up cooking his one up to make it perfect for my particular feeler gauge. I'm marking it as a remix even though there's no geometry in common because, well look at how similar it looks.
Library requirements
This requires you to install the BOSL2 library and the OpenSCAD library for HSW attachments to work. There's also a mesh, but you don't want the mesh, you want the OpenSCAD version so you can crank out whatever dimensions you desire. The default setting is what worked for my Misumi THG172MA and mine seems to be a lot smaller than everybody else's.
Printing settings
It's designed to print without supports and go straight into the honeycomb without needing any extra inserts.
The geometry for HSW is generally designed for PETG. I printed mine with Prusament black PETG on a 0.4mm nozzle.
If you like this:
- I have a paramaterized honeycomb storage wall that will fit any size
- I have a paramaterized 90 degree angle joiner, for the corners.
- I have a paramaterized ruler (or other long rectangular things) holder
- I have a paramaterized ChipQuik liquid flux organizer
- I have a paramaterized de-soldering sucker holder
- I have a collection of all of the Honeycomb Storage Wall bits I use myself