1 / 2
IKEA Ivar Spool Holder — image 1
1 / 2

IKEA Ivar Spool Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cheap Spool Holder Solution for your Ikea Ivar shelves

Rating
0 / 5
Likes
39
Downloads
153
Makes
0
Views
1,491
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Snaps directly onto the shelf pins. Holds two 20mm beams. I used pine, but recommend something stiffer if you go for the wider shelf. The pine holds up for quite a while now but I've switched to 20x2mm steel nonetheless

There are only variants for the 30cm version. 

I'm attaching the CAD file so you can edit it, if you need a different diameter or the 50cm version of the shelves

Update

I've added a pin that you can print and use to mount the beams on the shelf if you got no original pins left. Printed them in PLA and they hold the weight just fine 👌

 

Print Settings


4 perimeters
40% infill (grid)
5 bottom / 5 top layers
no supports
brim for the pins

Tags